Quick Answer: What steps should you follow to start a vehicle that has a dead battery quizlet?

Take out your jumper cables. Place both vehicles in Park or Neutral and shut off the ignition in both cars. Engage both parking brakes as well. Attach one of the red clips to the positive terminal of your battery.

What are the signs that repairs are needed for the steering brake and suspension systems?

If your vehicle experiences any of the following symptoms, a mechanic should inspect your steering and suspension systems:

  • Unusually bouncy or harsh ride.
  • Vibration at any speed.
  • Unusual noise in the front end of your car when going over bumps.
  • Unexpected noise when turning the steering wheel.
THIS IS INTERESTING:  Do car window stickers come off?

When jump-starting your car the negative electrical cable will probably be colored red and the positive electrical cable will probably be colored black?

The positive (red) cable should be attached to the positive terminals on each battery. The negative (black) cable should have one end attached to the negative terminal of the dead battery, and one end grounded.

When working with or around a battery always wear?

Remember, a battery contains sulfuric acid that can cause serious burns. Always wear gloves and eye protection when working around a battery or jump-starting a car. If you come into contact with battery acid, flush with plenty of water and get medical attention immediately.

Which of the following is the last connection made when jump-starting a vehicle with jumper cables quizlet?

Two technicians were discussing the procedure to​ jump-start a vehicle. Technician A stated that when​ jump-starting a​ vehicle, the last connection should always be made on the engine block or an engine bracket as close to the battery as possible.

What should be inspected on the steering system?

Inspection must include: visual, aural and functional assessments of mechanical, hydraulic and electrical steering system components, including for damage, corrosion, wear and leakage.

What steps should you follow to start a vehicle that has a dead battery Chapter 17?

Take out your jumper cables. Place both vehicles in Park or Neutral and shut off the ignition in both cars. Engage both parking brakes as well. Attach one of the red clips to the positive terminal of your battery.

When jump starting a car always remember positive to negative?

“If in doubt, seek help.” Remember that jumper cables usually have a set of clamps, one marked red for positive and the other black for negative. And battery terminals are usually marked with a + for the positive terminal and a – for negative.

THIS IS INTERESTING:  Do Nuna car seats have flame retardants?

What do you do when your car won’t jump start?

If the car starts right away, your problem is most likely a dead battery. Charge the battery and clean the terminals and cable connectors to ensure good contact. If your car does not start by jump-starting, you may have a problem with your starter, alternator or another component of the electrical system.

What do you do when your car battery is completely dead?

The most common way to deal with a dead battery is by jump-starting it. All you need to jump-start a car is a set of jumper cables and another car (a good Samaritan) with a functional battery. Keep in mind that you should never try to jump-start a car if its battery is cracked and is visibly leaking acid.

What safety measures should you take when working on batteries?

Battery Maintenance Safety Tips

  1. 1) Always wear protective eyewear and gloves. …
  2. 2) Eliminate sources of sparks or flames. …
  3. 3) Keep metal tools and jewelry away from batteries. …
  4. 4) Use caution when removing a lead-acid battery. …
  5. 5) Keep a neutralizing solution close by. …
  6. 6) Use the correct type of charger.

Which of the following is the last connection made when jump starting a vehicle with jumper cables group of answer choices?

STEP 8: Dead battery: Attach the other Negative Jumper Cable Lead to a Metal Ground. Connect the other negative clamp to the metal ground of the vehicle with the dead battery. You can use the engine block or another metal surface of the vehicle away from the battery. This is the last connection you need to make.

THIS IS INTERESTING:  Can you recharge a car battery that has been dead for a year?

How do you jumpstart a car quizlet?

Terms in this set (10)

  1. Put the red clamp on the positive terminal on the car with the dead battery.
  2. Put the red clamp on the postive terminal on the car with the good battery.
  3. Put the black clamp on the negative terminal on the car with the good battery.

When jump starting a car make sure the car is in?

Jump starting a car is commonly done from another car, although it can be done from a jump battery. You will be connecting the two cars’ batteries with the jumper cables. Make sure cars are in the right distance to have the jumper cables reach each battery.