Quick Answer: Can I use rubber hose for transmission cooling lines?

You can use rubber hose, but make sure it’s transmission cooler line rated. The pressure is quite low (12-15 psi). Double clamp it or use FI type clamps instead of the worm-drive style.

Will heater hose work on transmission lines?

It does seem you need to learn to read. Good luck with it. Do not use plastic tubing on fittings made for rubber hose. The barb on the fitting made for rubber hose is larger and the plastic would not go over it.

Can you repair a transmission cooler line?

Like all parts of an engine, transmission cooling lines can wear out. If they break or develop a leak, you will lose transmission fluid, leaving your car vulnerable. Thankfully this is a fairly simple fix, and most transmission line repairs cost between $100 and $500 dollars.

Can Fuel Injection hose be used for transmission fluid?

Fuel line will work for oil or atf. They also say if it is high pressure on the hose”fuel injection”. Just dont use vacuum hose. You will be fine with high pressure fuel line, but do not use the low pressure stuff.

THIS IS INTERESTING:  Can you call the police if your car breaks down?

Is fuel hose OK for coolant?

The very knowledgeable guy recommended fuel line as it was rated for the heat range and resistant to most anything. You will be fine.

Can you fix a transmission line leak?

You can simply cut the line and attach the adapter, which will make its line. Rubber hoses are another option for repairing your transmission line. However, you should only pick the ones that specifically designed for transmission only. Moreover, they are not designed for heat.

What causes transmission cooler lines leak?

The most common transmission cooler failures are due to either a leak in the body of the cooler itself, or a clogged line caused by something flowing through the system. This most likely is from the transmission itself.

How do transmission cooler lines connect to radiator?

Transmission coolers do not attach to the radiator. They attach in-line with the transmission fluid return line. It is common for an OEM transmission cooler to be built into the radiator tank to be cooled by the coolant in the radiator.

Can a transmission line be welded?

The structural integrity of steel pole structures is only as good as their welded connections. A tubular steel transmission pole generally consists of a series of welded assemblies. … The resulting tubular steel shafts then can be welded to flanges or other brackets to join them together.

Do you need special hose for transmission fluid?

That is right; your fuel will eat right through a vacuum line or heater hose, and your transmission fluid requires a specific type of hose as well. While you may look for a hose that is cracked and brittle before replacing, the real culprit is on the inside.

THIS IS INTERESTING:  What do car dealers use to write on windows?

Can rubber fuel line be used for oil?

Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.

What is transmission hose made of?

Car transmission lines connect your vehicle’s transmission to the vehicle’s radiator. Also known as transmission cooling lines, they are typically made of metal or composite aluminium and rubber hoses because they can handle the flow of hot transmission fluid.