All of our car stereos come with a fully fitted option, so when you buy your stereo you’ve got the option to get everything fully fitted as part of the total price. … Along with the fitting, we’ll also give you a full demonstration, so you know exactly how to use your new stereo system.
How much does it cost for someone to install a car stereo?
Shop car electronics professional installation
|Entertainment||Regular Price||Best Buy Totaltech™ Member Price 1|
|Standard Speaker Installation||$64.99||Included|
|Component Speaker Installation||$99.99||Included|
|Rear-Seat Video Installation||$119.99–$219.99||Included|
Can you fit your own car stereo?
Installing a new car stereo can often be simple enough to do yourself, and his article will provide you with a general guide on how to do it. Keep in mind that some cars and systems are more complicated than others and that every car and stereo system will be different, so some specifics may vary.
Will any aftermarket stereo fit?
Before considering other factors, the most important question you need to ask yourself is, “Will any car stereo fit?” The short answer to this is No. Not every head unit can fit in your car. Essentially, there are two main sizes: Single and Double DIN car stereos.
Should I install my own car stereo?
Be smart and save money when you can – installing your own car stereo system is a FANTASTIC way to save cash and get the great sound you couldn’t afford otherwise. Whether you’re well-off or not, you should consider doing things by yourself to save some money. … In many cases, car stereo shops charge a lot.
How long does it take to install a car stereo?
With all of the above caveats in mind, installation of a car stereo should take anywhere from one to four hours. However, times may vary and the only way to get an accurate quote on car stereo installation is to take it into a car audio shop.
Can you put a new radio in an old car?
In some cases, it is possible to replace a classic car radio with a standard DIN aftermarket head unit by mounting the new stereo under the dash, which has advantages and disadvantages. … The main issue is that you’ll have to run new speaker wires if your car shipped from the factory with a mono car radio.
Are all car stereos the same size?
Are All Head Units the Same Size? All head units are not the same size. Generally, head units come in one of two DIN sizes, known as single DIN head units and double DIN head units.
What does double din mean?
The double-DIN (also called 2-DIN) standard implies that a unit has double the height of a standard DIN radio at 180 by 100 mm, or roughly 7 by 4 inches.
How do I know if my car stereo is single or double DIN?
Single DIN or Double DIN Radio
If it measures roughly 7 inches long by 2 inches tall, then it’s a single DIN head unit, and you have to replace it with another single DIN unit. If your radio measures roughly 7 inches long by 4 inches tall, then it’s double DIN.
What does DIN mean in car stereos?
DIN is a car audio standard that was created by the German standards body Deutsches Institut für Normung (DIN). It specifies a height and width for car head units. When a unit is referred to as a single DIN car stereo, or a single DIN car radio, that means it is the height and width outlined in the DIN standard.
Which is better single DIN or double DIN?
Single DIN Vs Double DIN Sound Quality
When it comes to sound quality, there is little to no difference between the single DIN and double DIN head unit. The real difference between the two receivers is in the size of the display and the features that can be added to the stereo system because of the size.
How hard is it to install an aftermarket stereo?
Wiring in a new head unit is often the most daunting part of the process, which is especially true if you have no prior experience with electronics or wiring. If that’s the case, then you’ll find the job much easier if you use a wiring harness that’s designed specifically for your vehicle and head unit.
How easy is it to install a radio?
It’s simple–just Plug-and-Play. When installing a new radio, use a wiring harness. … To connect the aftermarket wiring harness to the new radio, match the clearly marked wires to the ones on the harness, then twist and crimp. On the right is what your connections should look like when all the wires are properly crimped.